CATALYST CX AMPLIFIERS
12 Amps Derived from Helix
The Catalyst® CX family comprises three dual-channel combo amplifiers that perform like traditional guitar amps, while providing the increased versatility of modern amplifiers. They feature 12 Amp Voicings derived from the award-winning Helix® amp and effects processor—ranging from pristine clean to modern high-gain—and each Amp Voicing is matched with a custom Boost type. There are also 24 HX®-quality effects spanning four effects categories. Additional features include sturdy construction, a Tap/Tuner button, an XLR line output, an effects loop, a Power Amp input for using Catalyst CX as a powered speaker, MIDI functionality, a 4-channel USB recording interface, and power output options. The free Catalyst Edit app for desktop and mobile devices provides deep editing capabilities. Add an optional LFS2 footswitch for even more flexibility, and an optional cover to protect your combo. From the 200-watt Catalyst CX 200, capable of holding its own on nearly any stage, to the 60-watt Catalyst CX 60, which is perfect for practice, recording, and performing in small venues—there’s a Catalyst CX amp for every player.
Catalyst CX 60 is a 60-watt dual-channel 1x12 combo amplifier featuring 12 Amp Voicings derived from Helix. It performs like a traditional guitar amp—while providing the increased versatility of a modern amp.
12 AMP VOICINGS
Select one of 12 Amp Voicings ranging from pristine clean to modern high-gain, derived from the Helix amp and effects processor.
TRADITIONAL CONTROLS PLUS
Catalyst CX amps feature familiar Volume, Gain, Tone, and Reverb controls—with numerous effect and other options available just “under the hood.”
PROFESSIONAL CONNECTIVITY
Connect Catalyst CX to professional P.A. or recording devices using the XLR line output (with Ground Lift switch).
OPTIONAL FOOTSWITCH
Connect an optional LFS2 foot switch to toggle between channels and turn effects on and off remotely. The roadworthy metal LFS2 comes with a cable.
TEMPO/TUNER
Tap in the tempo when using time-based effects such as delay and tremolo. Press and momentarily hold the button to access the chromatic tuner.
ONBOARD EFFECTS
Select up to two of 24 Reverb, Delay, Modulation, and Pitch effects derived from Helix.
Dedicated Boost
Each Amp Voicing is matched with an optimal Boost type. Use the Boost control to adjust the amount, and the Boost button to switch the circuit in and out.
EFFECTS LOOP
Insert external effects and other devices into your signal chain using the Effects Loop.
POWER AMP IN
Use Catalyst CX as a powered speaker by bypassing the preamp. Perfect for use with amp modellers and simulators.
OUTPUT POWER
Provides half power, 0.5 watts, and speaker Mute options for reduced volume with minimal tone variation.
USB
Use this to connect to the Catalyst Edit app (Mac®, PC, iOS®, Android™) and to the onboard audio interface, which provides 4 channels (4in/4out) at 24-bit, 44.1kHz or 48kHz.
MIDI
Catalyst 100 and 200 receive Program Change (channel/preset selection) and Continuous Controller messages via 5-pin DIN. Catalyst 60 supports MIDI over USB-B.
